subject
Engineering, 14.09.2019 02:30 aaronw3743

Air flows steadily through a cooler with a mass flow rate of 5 kg min^-1. the air enters the cooler at a temperature of 250°c and a pressure of 1.5 bar. the air enters the cooler through a pipe of 100mm diameter. the velocity of the air on exit from the cooler is 25 ms^-1. the air is cooled with water with a mass flow rate of 7.5 kg min^-1 and the temperature of the water increases by 35°c as it passes through the cooler. assuming that the heat transfer from the air to the water is 100% efficient and that, for the air, cp = 1.004 kj kg^-1 k^-1 and cv = 0.718 kj kg k-1 and the specific heat for the water = 4.187 kj kg^-1 k-1, determine the temperature of the air as it leaves the cooler.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
question
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
question
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
question
Engineering, 04.07.2019 18:10
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k
Answers: 2
You know the right answer?
Air flows steadily through a cooler with a mass flow rate of 5 kg min^-1. the air enters the cooler...
Questions
question
Mathematics, 19.05.2020 15:29
question
Mathematics, 19.05.2020 15:29
question
Mathematics, 19.05.2020 15:29
Questions on the website: 13722363