Engineering, 14.09.2019 02:10 braddypeter61
Two meshing 24-pitch, 25° pressure angle gears have n1-24 and n2 60 teeth. the in use center distance of the two gears is 0.16 inches larger than the design value of the center distance. what are the design value and in use value of the radius of the pitch circle of gear 1?
Answers: 3
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Engineering, 04.07.2019 18:20
A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?
Answers: 3
Two meshing 24-pitch, 25° pressure angle gears have n1-24 and n2 60 teeth. the in use center distanc...
Mathematics, 12.02.2021 23:20
Health, 12.02.2021 23:20
Mathematics, 12.02.2021 23:20
Advanced Placement (AP), 12.02.2021 23:20
Mathematics, 12.02.2021 23:20
History, 12.02.2021 23:20
History, 12.02.2021 23:20
English, 12.02.2021 23:20
Mathematics, 12.02.2021 23:20
Health, 12.02.2021 23:20
Mathematics, 12.02.2021 23:20
World Languages, 12.02.2021 23:20
Mathematics, 12.02.2021 23:20