Engineering, 14.09.2019 01:30 aariannahnorwoo
A450 mm model pump is tested at its recommended operating speed of 1800 rpm and head of 7 m and is found to deliver a flowrate of 60 litres/s. using the discharge and head relationships based on model performance data, estimate the diameter and speed of a homologous larger unit to efficiently pump 120 litres per second at a head of 12 m. check that the head and discharge relationships of the resulting design are the same as the model
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
Engineering, 04.07.2019 18:10
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
Engineering, 04.07.2019 18:20
Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false
Answers: 3
You know the right answer?
A450 mm model pump is tested at its recommended operating speed of 1800 rpm and head of 7 m and is f...
Questions
Biology, 02.08.2019 08:00
Geography, 02.08.2019 08:00
Geography, 02.08.2019 08:00
Geography, 02.08.2019 08:00
Geography, 02.08.2019 08:00
Geography, 02.08.2019 08:00
English, 02.08.2019 08:00
