Engineering, 14.09.2019 00:30 Destinyb9806
Ametallic material with yield stress of 140 mpa and cross section of 300 mm x 100 mm, is subjected to a tensile force of 8.00 mn. will the sample experience plastic deformation? you must justify your answer.
Answers: 2
)
Another question on Engineering
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
Engineering, 04.07.2019 18:10
Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables
Answers: 1
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
You know the right answer?
Ametallic material with yield stress of 140 mpa and cross section of 300 mm x 100 mm, is subjected t...
Questions
Mathematics, 17.01.2021 06:50
Chemistry, 17.01.2021 06:50
Mathematics, 17.01.2021 06:50
History, 17.01.2021 06:50
Business, 17.01.2021 06:50
History, 17.01.2021 06:50
Mathematics, 17.01.2021 06:50
