Engineering, 14.09.2019 00:30 jalenshayewilliams
Astraight sided cam has both sides tangential to the base of the circle which is 25mm radius and the total angle of action is 120 degrees. a lift of 10mm diameter is given to a roller 20mm diameter, the centre of which moves along a straight line passing through the axis of the cam. the camshaft has a speed of 240rev/min. determine the following: the radius of the nose arc; the speed of the roller centre when the roller is in contact with the cam at the end of one of the straight flanks adjacent to the nose ; the greatest acceleration of the roller center;
Answers: 2
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:20
What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.
Answers: 3
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
Astraight sided cam has both sides tangential to the base of the circle which is 25mm radius and the...
Mathematics, 24.08.2019 02:50
Biology, 24.08.2019 02:50
English, 24.08.2019 02:50
Biology, 24.08.2019 02:50
Mathematics, 24.08.2019 02:50
Social Studies, 24.08.2019 02:50
History, 24.08.2019 02:50
English, 24.08.2019 02:50
English, 24.08.2019 02:50
Mathematics, 24.08.2019 02:50