Engineering, 13.09.2019 23:30 cheesedoodle
An engineer machines annealed copper in an orthogonal machining experiment. given: cutting speed: 4m/min(13.1 ft/min) depth of cut: 1.17 mm (0.046 in) machine efficiency; 98% width of cut 6 mm (0.236 in) tool material: aluminum oxide coated carbide tool geometry: 2degree relief angle. -5degree rake angle, 5degree clearance angle. 1.75mm (0.069 in) nose radius cutting fluid: synthetic oil (coefficient of friction -0.1) use us standard units for all your work. calculate the shear angle when machining with synthetic oil. calculate the required horse power for the machine engine (motor).
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 14:10
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2
Engineering, 04.07.2019 18:20
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
Engineering, 04.07.2019 19:10
When subject to a steady load (within elastic range) over a long period of time, what is the major difference in material behavoir between steel and plastic?
Answers: 2
You know the right answer?
An engineer machines annealed copper in an orthogonal machining experiment. given: cutting speed:...
Questions
Chemistry, 22.03.2021 18:10
Physics, 22.03.2021 18:10
History, 22.03.2021 18:10
Mathematics, 22.03.2021 18:10
Mathematics, 22.03.2021 18:10
Chemistry, 22.03.2021 18:10
Mathematics, 22.03.2021 18:10
English, 22.03.2021 18:10
Mathematics, 22.03.2021 18:10
