Engineering, 13.09.2019 23:30 gianni0

Abatch dryer removes water from a solid at a rate of 30 kg/hr during the constant rate period. critical moisture content is 0.25 kg h2o dry solid. the equilibrium moisture content of the material is 0.035 kg h2o dry solid. the drier is initially charged with 750 kg of total material, which contains 2 00 000 g of moisture. the final product should contain 0.08 kg h2o dry solid. the falling rate period can be represented by a straight line. the total drying area is 5 m^2 . 1. draw a schematic diagram that depicts the process. 2. determine the total drying time to produce the product.

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.

Answers: 1

Answer

You know the right answer?

Abatch dryer removes water from a solid at a rate of 30 kg/hr during the constant rate period. criti...

Questions