Engineering, 13.09.2019 22:30 haydjanggg6578
Aball screw with an 8-mm pitch drives a worktable in an nc positioning system. the screw is powered by a stepping motor with 180 step angles. the worktable is programmed to move a distance of 150 mm from its present position at a travel speed of 400 mm/min. the mechanical inaccuracies in the open-loop positioning system can be described by a normal distribution whose standard deviation = 0.006 mm. the range of the worktable axis is 750 mm, and there are 12 bits in the binary register used by the digital controller to store the programmed position. for the positioning system, determine (a) the control resolution, (b) accuracy, and (c) repeatability. (d) what is the minimum number of bits that the binary register should have so that the mechanical drive system is the limitation on control resolution?
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
Engineering, 04.07.2019 18:20
For each of the following process: a) sketch the p-v diagram, b)sketch t-s diagram, c) sketch t-v diagram, d) sketch the boundary work on one of the diagrams (a, b or c) and e) sketch the reversible heat transfer on one of the diagrams (a, b or c): 1- isobaric process from compressed liquid to superheated vapor 2- isothermal process from compressed liquid to superheated vapor 3- isentropic process from compressed liquid to superheated vapor
Answers: 3
Engineering, 06.07.2019 02:30
Air (c-1.006 kj/kg.k, r-0.287 kj/kg.k) enters a nozzle steadily at 280 kpa and 77°c with a velocity of 50 m/s and exits at 85 kpa and 320 m/s. the heat losses from the nozzle to the surrounding medium at 20°c are estimated to be 3.2 kj/kg. determine (a) the exit temperature and (b) the total entropy change for this process. solve this problem using constant specific heats.
Answers: 1
You know the right answer?
Aball screw with an 8-mm pitch drives a worktable in an nc positioning system. the screw is powered...
Questions
Computers and Technology, 08.11.2019 07:31
Mathematics, 08.11.2019 07:31
Mathematics, 08.11.2019 07:31
