Engineering, 13.09.2019 22:30 BrandonBBB
Two wafer sizes are to be compared: a 156-mm wafer with a processable area = 150mm diameter circle and a 312-mm wafer with a processable area = 300mm diameter circle. the ic chips in both cases are square with 10 mm on a side? assume the cut lines (streets) between chips are of negligible width. what is the percent increase in (a) wafer diameter, (b) processable wafer area, and (c) number of chips for the larger wafer size?
Answers: 2
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
Engineering, 04.07.2019 18:20
For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.
Answers: 1
Two wafer sizes are to be compared: a 156-mm wafer with a processable area = 150mm diameter circle...
Computers and Technology, 22.04.2021 22:30
Medicine, 22.04.2021 22:30
Health, 22.04.2021 22:30
Mathematics, 22.04.2021 22:30
History, 22.04.2021 22:30
Computers and Technology, 22.04.2021 22:30
Chemistry, 22.04.2021 22:30
Physics, 22.04.2021 22:30
Mathematics, 22.04.2021 22:30