Engineering, 10.09.2019 21:30 mbonham481

Atransparent film is to be bonded onto the top surface of a solid plate inside a heated chamber. for the bond to cure properly, a temperature of 70c is to be maintained at the bond, between the film and the solid plate. the transparent film has a thickness of 1mm and thermal conductivity of 0.05w/mk, while the solid plate is 13mm thick and has a thermal conductivity of 1.2w/mk. inside the heated chamber, the convection heat transfer coefficient is 70w/m^2k. if the bottom surface of the plate is maintained at 52c, determine the temperature inside the heated chamber and the surface temperature of the transparent film. assume thermal contact resistance is negligible. answers: 127c, 103c
(hint: this is a one-dimensional, steady-state, heat conduction problem. the answers above are correct, i just need to see how to solve this problem)

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The higher the astm grain size number, the finer the gran is. a)-true b)-false

Answers: 2

Answer

You know the right answer?

Atransparent film is to be bonded onto the top surface of a solid plate inside a heated chamber. for...

Questions