subject
Engineering, 10.09.2019 03:10 javink18

Q.4. two thermocouples (temperature measurement devices) are tested by inserting their probes in boil- ing water, recording the readings, removing and drying the probes, and then doing it again. the results of five measurements are as follows: t(°c)-thermocouple a | 72.4 | 73.1 | 72.6 72.8 | 73.0 t(c) thermocouple b 973 1014 98.701100.4 (a) for each set of temperature readings, calculate the sample mean, the range, and the sample (b) which thermocoupie readings exhibit the higher degree of scatter? which thermocouple is more standard deviation. accurate?

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
question
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
question
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
question
Engineering, 04.07.2019 19:10
An external consultant recommends that a plant installs a bank of capacitors for power factor correction. this will reduce the peak electrical demand charges by an average of 93 kw every month. the plant current pays $13 per kw in peak demand charges. the capacitor bank will include 223 kw of fixed capacitors, and 183 of variable capacitors. the fixed capacitors cost $59 per kw, and the variable capacitors will cost $65 per kw. the consultant charges 21% of the equipment costs to install the capacitors. because this project will reduce the demand for the electric utility, they are prepared to provide a one-time rebate of $42 per kw of reduced demand. what is the simple payback period for this project (in years)?
Answers: 2
You know the right answer?
Q.4. two thermocouples (temperature measurement devices) are tested by inserting their probes in boi...
Questions
question
English, 11.02.2021 23:20
question
Mathematics, 11.02.2021 23:20
question
Mathematics, 11.02.2021 23:20
Questions on the website: 13722367