In a 5v system if you were asked to take one input high and another low what would you do (i. e. where would you connect them)?

HIGH from the supply voltage

LOW from ground

Explanation:

The answer depends on the kind of system and the purpose of the signal. But for practical reasons, in a DIGITAL system where 5V is HIGH and 0 V is LOW, 5 volts can be taken from the supply voltage (usually the same as high,  BUT must be verified), and the LOW signal from ground.

If the user has a multimeter, it must be set to continuous voltage on 0 to 20 V range.  Then place the probe in the ground of the circuit (must be a big copper area). Finally  leave one probe in the circuit ground and place the other probe in some test points to identify 5 v.

answer:

yes

explanation: