subject
Engineering, 03.09.2019 04:20 jeftegerman988

In an air conditioner that cools with r134-a and with a by-pass factor of 0.53, the air enters at 35 (° c) and 70 percent relative humidity at a speed of 5 (m3 / min). the refrigerant (r134a) enters a in the coil at 400kpa with a quality of 20% and leaves as satured vapor. the air at the outlet of the conditioning system can be considered a mixture of air that cools to the temperature of the refrigerant and air that exits in the same conditions as at the inlet. determine: 1. mass flow rate of dry air (kg_a/s).2. air outlet temperature (ºc).3. specific enthalpy (kj / kg_as) and absolute humidity (kg_v / kg_as) of the air at the exit.4. the rate of dehumidification(kg_w / h).5. heat flow rate exchanged between refrigerant and air (kw) .6. mass flow rate of refrigerant (kg / s).7. entropy generated in the refrigerant as a system.8. draw the psychrometric diagram.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2
question
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
question
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
question
Engineering, 04.07.2019 18:10
True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure
Answers: 2
You know the right answer?
In an air conditioner that cools with r134-a and with a by-pass factor of 0.53, the air enters at 35...
Questions
question
English, 07.12.2020 05:00
question
Mathematics, 07.12.2020 05:00
question
Chemistry, 07.12.2020 05:00
question
Mathematics, 07.12.2020 05:00
Questions on the website: 13722363