subject
Engineering, 02.09.2019 21:20 theblackdot16

Ajet impinges directly on to a plate that is oriented normal to the axis of the jet. the mass flow rate of the jet is 50 kg/min and its velocity is 200 m/s. perform a control volume analysis to calculate the force on the plate.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
question
Engineering, 04.07.2019 18:20
Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives
Answers: 2
question
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
question
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
You know the right answer?
Ajet impinges directly on to a plate that is oriented normal to the axis of the jet. the mass flow r...
Questions
question
Mathematics, 27.05.2021 17:00
question
Mathematics, 27.05.2021 17:00
question
Biology, 27.05.2021 17:00
question
Mathematics, 27.05.2021 17:00
question
Geography, 27.05.2021 17:00
Questions on the website: 13722367