subject
Engineering, 30.08.2019 18:20 bayloann3928

Ashell and tube heat exchanger with one shell pass and two tube passes is to be designed to heat 50,000 lbm/hr of water from 180 f to 210 f. the heating is done by condensing dry saturated steam at 50 psi and 281 f in the shell. there are thirty 1 in. od tubes in each tube pass, and the overall heat transfer coefficient u is 450 btu/hr-sq ft f. whatâs the length of the tubes required for the hear exchanger?

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
question
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
question
Engineering, 04.07.2019 18:10
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
question
Engineering, 04.07.2019 18:20
Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.
Answers: 3
You know the right answer?
Ashell and tube heat exchanger with one shell pass and two tube passes is to be designed to heat 50,...
Questions
question
English, 17.06.2020 03:57
question
Mathematics, 17.06.2020 03:57
Questions on the website: 13722362