Engineering, 30.08.2019 17:20 lekaje2375
Amanual assembly line is being planned for a product whose annual demand = 9 units. a continuously moving conveyor will be used with work units attached. work content time = 55 min. the line will run 50 wk/yr, 5 shifts/wk, and 8 hr/shift. each worker will be assigned to a separate workstation. based on previous experience, assume line efficiency = 0.95, balancing efficiency = 0.93, and repositioning time = 9 sec. determine: a. hourly production rate to meet the demand, b. number of workers and work station required, and c. for comparison, the ideal minimum number of workstations required (theoretical).
Answers: 1
Engineering, 04.07.2019 18:10
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
Engineering, 04.07.2019 18:10
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
Engineering, 04.07.2019 18:10
True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure
Answers: 2
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
Amanual assembly line is being planned for a product whose annual demand = 9 units. a continuously m...
Physics, 13.11.2020 09:40
Mathematics, 13.11.2020 09:40
Biology, 13.11.2020 09:40
Mathematics, 13.11.2020 09:40
Medicine, 13.11.2020 09:40
Mathematics, 13.11.2020 09:40
English, 13.11.2020 09:40
Mathematics, 13.11.2020 09:40
Mathematics, 13.11.2020 09:40
Physics, 13.11.2020 09:40
Biology, 13.11.2020 09:40
English, 13.11.2020 09:40
Social Studies, 13.11.2020 09:40