Engineering, 30.08.2019 04:10 alondraalfaro06
Afull journal bearing is required for a shaft with the following specifications: nominal diameter 40 mm diametric clearance 60 µm rotational speed (rpm) 1450 load on the bearing 2100 n inlet temperature of the lubricant 60°c bearing length to diameter 1. assume the lubricant is sae 10 and an initial temperature change is 15°c. a)-determine the overall temperature rise in the bearing. b)-determine the flow rate of the lubricant required.
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 14:10
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
You know the right answer?
Afull journal bearing is required for a shaft with the following specifications: nominal diameter 4...
Questions
Advanced Placement (AP), 16.11.2020 17:20
Mathematics, 16.11.2020 17:20
SAT, 16.11.2020 17:20
Mathematics, 16.11.2020 17:20
Physics, 16.11.2020 17:20
