Engineering, 30.08.2019 00:30 nathaliereyes283
Atank contains liquid nitrogen at -190ā is suspended in a vacuum shell by three stainless steel rods 0.80 cm in diameter and 3 meters long with a thermal conductivity of 16.3 w/m^2-ā. if the ambient air outside the vacuum shell is 15ā, calculate the magnitude of the conductive heat flow in watts along the support rods. a. 0.168 b. 0.0587 c. 0.182 d. 0.176
Answers: 2
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
Engineering, 04.07.2019 19:20
Heat transfer by is the fastest mode of heat transfer that requires no intervening medium. a)-conduction b)-convection c)-radiation d)-conduction and convection
Answers: 1
Engineering, 04.07.2019 19:20
Ashielded metal arc-welding operation is accomplished in a work cell by a fitter and a welder. the fitter takes 5.5 min to load components into the welding fixture at the beginning of the work cycle, and 1.5 min to unload the completed weldment at the end of the cycle. the total ength of the weld seams 1200 mm, and the travel speed used by the welder averages 300 mm/min. every 600 mm of seam length, the welding stick must be changed, which takes 0.8 min. while the fitter is working, the welder is idle (resting): and while the welder is working the fitter is idle. (a) determine the average arc-on time as a fraction of the work cycle time. (b) how much improvement in arc-on time would result if the welder used flux-cored arc welding (manually operated), given that the spool of weld wire must be changed every 10 weldments, and it takes the welder 5.0 min to accomplish the change? (c) what are the production rates for these two cases (weldments completed per hour)? attach your work and solutions.
Answers: 1
Atank contains liquid nitrogen at -190ā is suspended in a vacuum shell by three stainless steel rods...
Mathematics, 25.07.2019 08:30
Mathematics, 25.07.2019 08:30
History, 25.07.2019 08:30
Mathematics, 25.07.2019 08:30
Mathematics, 25.07.2019 08:30
Mathematics, 25.07.2019 08:30
Biology, 25.07.2019 08:30
Mathematics, 25.07.2019 08:30
Mathematics, 25.07.2019 08:30
Mathematics, 25.07.2019 08:30