Engineering, 29.08.2019 18:30 bigmouth804
Asolid round bar with diameter of 50-mm has a groove cut to a diameter of 45-mm, with a radius of 2.5-mm. the bar is not rotating. the bar is loaded with a repeated bending load that causes the bending moment at the groove to fluctuate between 0 and 2825 n-m. the bar is hot-rolled aisi 1095, but the groove has been machined. a) determine the factor of safety for fatigue based on infinite life and b) determinethe factor of safety for yielding.
Answers: 3
Engineering, 03.07.2019 14:10
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Asolid round bar with diameter of 50-mm has a groove cut to a diameter of 45-mm, with a radius of 2....
Computers and Technology, 09.03.2020 21:39
Mathematics, 09.03.2020 21:39
Arts, 09.03.2020 21:39
Chemistry, 09.03.2020 21:40
Computers and Technology, 09.03.2020 21:41
Mathematics, 09.03.2020 21:41