The extrusion die for a polyethylene parison used in blow molding has a mean diameter of 20.0 mm. the size of the ring opening in the die 2.0 mm. the mean diameter of the parison is observed to swell to a size of 23.0 mm after exiting the die orifice. if the diameter of the blow-molded container = 125 mm, determine: (a) the corresponding wall thickness of the final container, (b) the inside diameter of the parison.

Determine the time of the day and month of the year at which the peak sensible cooling load occurs for a top floor, north-eastern corner room of an office building in durban for the following conditions: floor area: 8 x 8 x 3 m east and north walls: 115 mm face brick (outside), 20 mm air space, 115 mm ordinary brick (inside) with 15 mm plaster roof construction: suspended plasterboard ceiling, 450 mm air space, 150 mm concrete, 75mm screed, waterproofing no heat transfer across other surfaces window area 3x 1,5 m high in north wall only. ordinary glass with venetian blinds. lights and occupants : from 07: 00 to 18: 00 average light density: 25 w/m2 number of occupants : 5 seated, light office work room temperature 24°c