Engineering, 23.08.2019 19:20 genyjoannerubiera
You are investigating a 5 cm diameter part that will operate under a 0.75 mn load in service. the material has a yield strength of 450 mpa, a uts of 600 mpa, and fracture toughness 75 mpa m 2 a. will the part fail in ductile yield? b. will the part fail by necking and rupture? c. what is the critical flaw size necessary for fast fracture to occur?
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
Engineering, 04.07.2019 19:10
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
Engineering, 04.07.2019 19:10
Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.
Answers: 1
Engineering, 04.07.2019 19:20
Consider airflow over a flat plate of length l = 1.5 m under conditions for which transition occurs at le = 0.9 m based on the critical reynolds number, re,e = 5 x 10. evaluating the thermophysical properties of air at 400 k, determine the air velocity. (hint: use the tables to find the properties of air)
Answers: 3
You know the right answer?
You are investigating a 5 cm diameter part that will operate under a 0.75 mn load in service. the ma...
Questions
Mathematics, 12.03.2021 01:00
Chemistry, 12.03.2021 01:00
Chemistry, 12.03.2021 01:00
Mathematics, 12.03.2021 01:00
Mathematics, 12.03.2021 01:00
English, 12.03.2021 01:00
Mathematics, 12.03.2021 01:00
Mathematics, 12.03.2021 01:00
Arts, 12.03.2021 01:00
Chemistry, 12.03.2021 01:00
