subject
Engineering, 22.08.2019 04:20 dontworry48

Description: an apartment building has a pumped ring main that circulates hot water at 75 c through insulated 40 mm pipe with heat loss of 17 watts/metre. at each apartment, this hot water is mixed with cold water to a delivery temperature of 50c? one of the sub-questions provides extra info: it takes 0.00119 kwh/degree/litre to heat water from 15c to 50c.
my problem:
with typical water-efficient shower and taps, typical melbourne usage of hot water is 44 litres/day/person. for typical occupancy of 1.8 people, what is the effective efficiency of this hot water distribution system (for simplicity assume the existing heating system feeding the distribution system is 100% note that this efficiency calculation ignores the efficiency of production of hot water.
if anyone can me or if anyone has any idea that would be great!
: )

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
question
Engineering, 04.07.2019 18:10
Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer
Answers: 2
question
Engineering, 04.07.2019 19:20
Afan that can provide air speeds up to 60 m/s is to be used in a low-speed wind tunnel with atmospheric air at 35 c. if one wishes to use the wind tunnel to study flat-plate boundary layer behavior up to reynolds numbes of re 10, what is the minimum plate length that should be used? at what distance from the leading edge would transition occur if the critical reynolds nurnber were rer,e = 5 Ɨ 105?
Answers: 2
question
Engineering, 06.07.2019 03:20
What is the strain energy stored in a solid uniformly circular shaft of length 3.0 m and diameter 120 mm when subject to pure torsion if the maximum shear stress is 40 mpa? g-80gpa
Answers: 1
You know the right answer?
Description: an apartment building has a pumped ring main that circulates hot water at 75 c through...
Questions
question
Social Studies, 16.10.2020 07:01
question
English, 16.10.2020 07:01
question
Mathematics, 16.10.2020 07:01
question
Mathematics, 16.10.2020 07:01
question
Mathematics, 16.10.2020 07:01
Questions on the website: 13722361