Engineering, 21.08.2019 21:30 payshencec21
A6kg robot is required to climb a 45 degree incline. the wheel radius is 20mm, what torque is required to drive the robot at a constant rate? the robot must accelerate at up to 10 mm/s^2. what torque is required?
Answers: 1
         
Another question on Engineering
Engineering, 04.07.2019 18:10
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
You know the right answer?
A6kg robot is required to climb a 45 degree incline. the wheel radius is 20mm, what torque is requir...
Questions
English, 27.09.2019 22:00
Social Studies, 27.09.2019 22:00
Mathematics, 27.09.2019 22:00
Mathematics, 27.09.2019 22:00
History, 27.09.2019 22:00
History, 27.09.2019 22:00
History, 27.09.2019 22:00
