subject
Engineering, 20.08.2019 23:30 jetskiinbunny31

Acryogenic liquid line in an ultra-low temperature tissue storage facility has a diameter of 0.05 cm, a surface temperature of -163 °c, and a surface emissivity of 0.2. this line is placed at 0.15m away from a pipe with a diameter of 0.1 m, carrying heated liquid at 47°c and having a surface emissivity of 0.5. the pipe and the line are parallel to one another and are exposed to the sky, which on a clear night can be assumed to have the same temperature as extra-terrestrial space, of 4 k. neglect convection effects in your analysis. a.) draw the corresponding radiation resistance network and label what each node. b) calculate the net radiation heat transfer rate per unit length to the line carrying the cryogenic c) propose a solution to reduce to half the net radiation heat transfer rate per unit length of line(must be justified mathematically). d) calculate the net radiation heat transfer rate per unit length to the line carrying the cryogenic fluid if the line and the pipe are moved inside a large enclosure with adiabatically insulated walls of 0.6 emissivity. for simplicity, when answering this question, assume that the walls of the enclosure have a temperature of 4k.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 23:20
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
question
Engineering, 04.07.2019 18:10
Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges
Answers: 1
question
Engineering, 04.07.2019 18:10
Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer
Answers: 2
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
You know the right answer?
Acryogenic liquid line in an ultra-low temperature tissue storage facility has a diameter of 0.05 cm...
Questions
question
Mathematics, 15.09.2021 01:00
question
Mathematics, 15.09.2021 01:00
question
Mathematics, 15.09.2021 01:00
question
Mathematics, 15.09.2021 01:00
Questions on the website: 13722361