Engineering, 20.08.2019 21:10 davestrider404

Room temperature air flows over a horizontal smooth flat plate at a freestream speed of u = 20 m/s. the plate length is l = 1.5 m and its width is b = 0.8 m. the boundary layer is tripped at its leading edge so that it is turbulent over its entire length. using results based on the 1/7th power velocity profile, evaluate the boundary layer thickness δ at the trailing edge of the plate. calculate the wall shear stress at the trailing edge of the plate. estimate the drag (due to friction) on the portion of the plate between x = 1.0 m and the trailing edge and compare this with the drag over the first 0.5 m of the plate.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Answers: 3

Answer

Engineering, 04.07.2019 18:10

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1

Answers: 1

Answer

You know the right answer?

Room temperature air flows over a horizontal smooth flat plate at a freestream speed of u = 20 m/s....

Questions