subject
Engineering, 20.08.2019 18:30 Jowell3858

Determine the heat exchange per m² of area a, in the following cases if a, is at 1000 k and a, is at 400 k, both surfaces being black. (i) perpendicular planes 2 mx 1 m size with 2 m being the common edge (ii) perpendicular planes of 2 mx 1 with 1 m being the common edge. (ii) equal coaxial parallel disks of 1 m dia, placed 1 m apart (iii) same as in (iv) but placed 0.5 m apart. (v) concentric circular disks of 1 m dia and 0.5 m dia placed 0.5 m apart with the smaller one as surface a1

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
question
Engineering, 04.07.2019 18:10
Fluids at rest possess no flow energy. a)- true b)- false
Answers: 3
question
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
question
Engineering, 04.07.2019 18:10
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
You know the right answer?
Determine the heat exchange per m² of area a, in the following cases if a, is at 1000 k and a, is at...
Questions
question
Mathematics, 22.09.2019 20:30
Questions on the website: 13722367