Engineering, 20.08.2019 18:30 ciaotaylor

Consider a piston-cylinder assembly located in a room at 100 kpa and in which a saturated liquid+vapor mixture of h2o exists with a quality of 0.5. heat is added until the specific volume is tripled. neglect changes in potential and kinetic energy. neglect the mass of the piston. a. draw the process and label the states on a t-v diagram. b. draw the process and label the states on a p-v diagram. c. determine the boundary work per unit mass. d. determine the heat transfer per unit mass. e. determine the entropy produced per unit mass if the boundary temperature is 200°c.

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um

Answers: 2

Answer

You know the right answer?

Consider a piston-cylinder assembly located in a room at 100 kpa and in which a saturated liquid+vap...

Questions