Engineering, 20.08.2019 18:10 Adriingashley3521
Describe the basic approach to finite element analysis in the engineering context.
Answers: 3
Another question on Engineering
Engineering, 06.07.2019 03:10
Steel balls 12 mm in diameter are annealed by heating to 1150 k and then slowly cooled to 400 k in an air att 325 k and h -20 w/m2 k. assume the properties of the steel to be k- 40 w/m k,p 7800 kg/m3, and cp 600 j/kg k. a. determine whether lumped system method can be used to analyze this problem and if so why" b. determine the time required for the cooling process. c. determine the total amount of heat lost from each ball to the ambient air
Answers: 1
Engineering, 06.07.2019 04:10
Areheat rankine cycle operates with water as the working fluid. steam enters the first turbine at 8 mpa and 450°c and exits at 0.8 mpa. it is then reheated to 400°c before entering the second turbine, where it exits at 10 kpa. if the amount of work into the pump is 8.04 kj/kg and the net work per cycle produced is 1410.25 kj/kg, determine the thermal efficiency of the cycle.
Answers: 3
Engineering, 06.07.2019 04:10
Along steel shaft of 10 cm diameter is austenised at 870°c and then quenched in a liquid at 30oc. the average surface heat transfer coefficient is 2000 w/m2. °c. the relevant thermophysical properties of the shaft are: p=7800 kg/m", k=20 w/mk, cp=0.46 kj/kg.k calculate: a)-the time required for the center temperature to drop to 200°c. b)-the temperature at half-radius at that moment. c)-the amount of heat that had been transferred to the liquid by that time per meter length of the shaft
Answers: 1
Engineering, 06.07.2019 04:30
Describe briefly, the concept of mass production in modern industrial system.
Answers: 1
You know the right answer?
Describe the basic approach to finite element analysis in the engineering context....
Questions
Chemistry, 01.02.2021 01:30
Mathematics, 01.02.2021 01:30
English, 01.02.2021 01:30
English, 01.02.2021 01:30
Mathematics, 01.02.2021 01:30
English, 01.02.2021 01:30
Mathematics, 01.02.2021 01:30
Mathematics, 01.02.2021 01:30
Mathematics, 01.02.2021 01:30
Mathematics, 01.02.2021 01:30
Health, 01.02.2021 01:30
