Engineering, 20.08.2019 17:10 momo26590
Agrey iron casting has a surface area of 6.5m². it is stripped from the mould when the surface temperature is 400°c. determine the rate at which heat is radiated from the casting if the temperature in the foundry is 30°c and emissivity of the grey cast iron is 0.31
Answers: 2
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.
Answers: 1
Agrey iron casting has a surface area of 6.5m². it is stripped from the mould when the surface tempe...
Chemistry, 30.07.2019 22:30
Mathematics, 30.07.2019 22:30
English, 30.07.2019 22:30
Mathematics, 30.07.2019 22:30
Mathematics, 30.07.2019 22:30
Mathematics, 30.07.2019 22:30
Mathematics, 30.07.2019 22:30