subject
Engineering, 08.08.2019 21:30 hannah2757

Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.128 kg/s, and it leaves at 0.7 mpa and 50°c. the refrigerant is cooled in the condenser to 24°c and 0.65 mpa, and it is throttled to 0.15 mpa. disregarding any heat transfer and pressure drops in the connecting lines between the components determine (a) the rate of heat removal from the refrigerated space and the power input to the compressor kw (round to one decimal place) kw (round to two decimal places) in (b) the isentropic efficiency of the compressor, % (round to one decimal place) and (c) the cop of the refrigerator cop round to two decimal places)

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 12:10
On a average work day more than work place firs are reorted
Answers: 1
question
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
question
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
question
Engineering, 04.07.2019 19:10
With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.
Answers: 1
You know the right answer?
Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c...
Questions
question
Mathematics, 22.01.2021 14:00
question
Mathematics, 22.01.2021 14:00
Questions on the website: 13722363