Engineering, 07.08.2019 19:10 rameseshajj
A150-mm pipe is connected to the side of a water tank at a depth of 8 m. a 50-mm diameter nozzle is connected to the end of pipe. for steady water surface in the tank and no losses in the system, determine the velocity of jet and the pressure inside the pipe
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
Engineering, 04.07.2019 19:10
The air in an automobile tire with a volume of 0.015 m3 is at 32°c and 140 kpa gage. determine the amount of air that must be added to raise the pressure to the recommended value of 206 kpa gage. assume the atmospheric pressure to be 128 kpa and the temperature and the volume to remain constant.[r-0.287 kj/kgk]
Answers: 3
You know the right answer?
A150-mm pipe is connected to the side of a water tank at a depth of 8 m. a 50-mm diameter nozzle is...
Questions
Computers and Technology, 12.08.2020 08:01
Mathematics, 12.08.2020 08:01
Mathematics, 12.08.2020 08:01
Mathematics, 12.08.2020 08:01
Computers and Technology, 12.08.2020 08:01
Mathematics, 12.08.2020 08:01
Computers and Technology, 12.08.2020 08:01
History, 12.08.2020 08:01
English, 12.08.2020 08:01
Social Studies, 12.08.2020 08:01
