Engineering, 07.08.2019 04:30 nila49
Alow-carbon steel was found to follow o= (717 mpa)e^0.234. if the initial diameter was 12.8 mm and was reached duing the tensile test of this steel. 4, the diameter at fracture was 9.27 mm, calculate the maximum tensile load (kn) that during the tensile test of this steel.
Answers: 2
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 03.07.2019 19:30
When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line
Answers: 3
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10
What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information
Answers: 3
Alow-carbon steel was found to follow o= (717 mpa)e^0.234. if the initial diameter was 12.8 mm and w...
Chemistry, 06.11.2020 07:50
Mathematics, 06.11.2020 07:50
Mathematics, 06.11.2020 07:50
History, 06.11.2020 08:00
Mathematics, 06.11.2020 08:00
Physics, 06.11.2020 08:00
Arts, 06.11.2020 08:00
Biology, 06.11.2020 08:00
Computers and Technology, 06.11.2020 08:00
Mathematics, 06.11.2020 08:00
Mathematics, 06.11.2020 08:00
Physics, 06.11.2020 08:00