Engineering, 06.08.2019 17:20 AleOfficial101
Liquid water enters a cooling tower operating at a steady state 40ºc with a mass flow rate of 105 kg/h. cooled water at 25ºc exits the cooling tower at the same mass flow rate. makeup water is supplied at 23ºc. atmospheric air enters the tower at 30ºc, 1 bar, 35% relative humidity. a saturated moist air stream exits at 34 ºc, 1 bar. determine a. the mass flow rates of the dry air and makeup water, each in kg/h. b. teh rate of exergy destruction within the cooling tower, in kw, for t0 = 23ºc
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Engineering, 04.07.2019 18:20
Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.
Answers: 2
You know the right answer?
Liquid water enters a cooling tower operating at a steady state 40ºc with a mass flow rate of 105 kg...
Questions
Computers and Technology, 25.02.2020 21:27
Social Studies, 25.02.2020 21:28
Mathematics, 25.02.2020 21:28
Mathematics, 25.02.2020 21:28
