subject
Engineering, 02.08.2019 19:20 lovly8914

A4-m-high and 6-m-wide wall consists of a long 18-cm×30-cm cross section of horizontal bricks (k=0.72w/m°c) separated by 3-cm-thick plaster layers (k=0.22w/m°c). there are also 2-cm-thick plaster layers on each side of the wall, and a 2-cm-thick rigid foam (k=0.026w/m°c) on the inner side of the wall. the indoor and the outdoor temperatures are 22°c and -4°c, and the convection heat transfer coefficients on the inner and the outer sides are h1=10w/m^2°c and h2=20w/m^2°c, respectively. assuming onedimensional heat transfer and disregarding radiation, determine the rate of heat transfer through the wall.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
question
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
question
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
question
Engineering, 04.07.2019 18:20
Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false
Answers: 2
You know the right answer?
A4-m-high and 6-m-wide wall consists of a long 18-cm×30-cm cross section of horizontal bricks (k=0.7...
Questions
question
Mathematics, 20.09.2019 05:10
Questions on the website: 13722362