Engineering, 26.07.2019 17:10 jayzie1728

Asingle-thread steel worm rotates at 180.64 rad/s, meshing with a 24-tooth worm gear trans mitting 0.7457 kw to the output shaft. the worm pitch diameter is 3 in and the tangential diametral pitch of the gear is 4 teeth/in. the normal pressure angle is 14.5. the ambient temperature is 294.26 k. the application factor is 1.25 and the design factor is ; gear face width is 12.7 mm, lateral case area 5483.86 cm2, and the gear is chill-cast bronze. (a) find the gear geometry (b) find the transmitted gear forces and the mesh efficiency (c) is the mesh sufficient to handle the loading? (d) estimate the lubricant sump temperature.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k

Answers: 2

Answer

Engineering, 04.07.2019 19:20

The process in which the system pressure remain constant is called a)-isobaric b)-isochoric c)-isolated d)-isothermal

Answers: 3

Answer

Engineering, 06.07.2019 02:30

Air (c-1.006 kj/kg.k, r-0.287 kj/kg.k) enters a nozzle steadily at 280 kpa and 77°c with a velocity of 50 m/s and exits at 85 kpa and 320 m/s. the heat losses from the nozzle to the surrounding medium at 20°c are estimated to be 3.2 kj/kg. determine (a) the exit temperature and (b) the total entropy change for this process. solve this problem using constant specific heats.

Answers: 1

Answer

You know the right answer?

Asingle-thread steel worm rotates at 180.64 rad/s, meshing with a 24-tooth worm gear trans mitting 0...

Questions