Engineering, 26.07.2019 17:10 dbenitezmontoya3

Asquare fin with sides of length t=1 cm, overall length l=6 cm, and thermal conductivity k=10 w/m-k is subjected to convection (h=40 w/m2-k, t=20"c) around its surface, including the tip. it is also generating energy (q=2x105 w/m*) uniformly throughout its volume. the fin has a constant base temperature tb=40°c. use the finite difference method with 5 nodes to estimate t(x )plot t(x) from the base (x=0) to the tip (x=l). how would your graph change if q=0 (no internal generation)?

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k

Answers: 3

Answer

Engineering, 04.07.2019 18:20

How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.

Answers: 2

Answer

You know the right answer?

Asquare fin with sides of length t=1 cm, overall length l=6 cm, and thermal conductivity k=10 w/m-k...

Questions