Engineering, 20.07.2019 04:20 saraaaaaaaa20
When a heat exchanger was first installed tests showed that the overall heat transfer coefficient was 213 w/m2k. after it had operated for six months a re-run of the tests gave a value of 133 w/m2k for the overall coefficient. inspection showed the inside of the tubes to be clean but the outside to be heavily fouled. estimate the fouling factor on the outside of the tubes, taking the fouling factor on the inside to be zero
Answers: 2
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
Engineering, 04.07.2019 18:20
Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false
Answers: 3
When a heat exchanger was first installed tests showed that the overall heat transfer coefficient wa...
Mathematics, 20.01.2021 18:10
Mathematics, 20.01.2021 18:10
Arts, 20.01.2021 18:10
Mathematics, 20.01.2021 18:10
Mathematics, 20.01.2021 18:10
Biology, 20.01.2021 18:10
Medicine, 20.01.2021 18:10