Engineering, 19.07.2019 20:30 diamondgodbee123

Aflexible machine part was observed to vibrate excessively at 20 hz due to a harmonic force of unknown amplitude. it was concluded that vibration was large because the harmonic force coincided with the natural frequency of the flexible part. when the harmonic force was not present, a 0.5 kg mass was placed on the flexible part and a static displacement of 3.0 mm was observed. the mass was then removed. a) the flexible part is to be modelled as a one degree-of-freedom, mass-spring-damper system. what mass and stiffness would be appropriate? b) a tuned vibration absorber is used to eliminate the vibration at 20 hz. if a mass of 0.03 kg is used for the absorber, what stiffness is required? c) if the amplitude of the absorber mass at 20 hz was observed to be1 cm, what is the amplitude of the harmonic force acting on the flexible part?

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.

Answers: 2

Answer

You know the right answer?

Aflexible machine part was observed to vibrate excessively at 20 hz due to a harmonic force of unkno...

Questions