subject
Engineering, 19.07.2019 00:30 deena7

Two masses of 14,5 kg and 17,91 kg respectively are firmly attached to a rotating faceplate on a lathe. the 14,5 kg mass is attached at a radius of 91 mm and 17,91 kg mass at a radius of 101 mm from the centre o. the eccentricities of the 14,5 kg mass and the 17,91 kg mass are at an angle of 120° to one another. determine the distance where a 15 kg mass must be placed to balance the system

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
question
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
question
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
question
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
You know the right answer?
Two masses of 14,5 kg and 17,91 kg respectively are firmly attached to a rotating faceplate on a lat...
Questions
Questions on the website: 13722362