subject
Engineering, 19.07.2019 00:30 maciemarklin3522

Two an electric motor weighing 2,500 n is supported on four springs, each having a stiffness of 4.4 kn/m. the rotor has a weight of 500 n with its center of mass located at a distance of 0.2 mm from the axis of rotation. assume the system has damping ratio equivalent to ? 0.2. find the amplitude of vibration of the motor and the force transmitted through the springs to the base when motor is running at 120 rpm

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
question
Engineering, 03.07.2019 23:20
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
question
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
question
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
You know the right answer?
Two an electric motor weighing 2,500 n is supported on four springs, each having a stiffness of 4.4...
Questions
question
Mathematics, 08.03.2021 20:50
question
Mathematics, 08.03.2021 20:50
Questions on the website: 13722363