Engineering, 18.07.2019 01:40 paradisetiyae6903
Consider a pipe (diameter of 50 mm) with air flowing through it. the inlet conditions are: mach 3; total pressure = 1000 kpa and 550 k. the friction coefficient (f) is 0.004. the exit mach number decreases with the length of the pipe. assume adiabatic, steady flow.
Answers: 3
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Consider a pipe (diameter of 50 mm) with air flowing through it. the inlet conditions are: mach 3;...
Mathematics, 19.07.2019 04:50
History, 19.07.2019 04:50
Biology, 19.07.2019 05:00
Mathematics, 19.07.2019 05:00
History, 19.07.2019 05:00
Mathematics, 19.07.2019 05:00
Mathematics, 19.07.2019 05:00
Social Studies, 19.07.2019 05:00
Mathematics, 19.07.2019 05:00
Business, 19.07.2019 05:00
Mathematics, 19.07.2019 05:00