The tank of the air compressor is subjected to an internal pressure of 0.63 mpa. if the internal diameter of the tank is 550mm, and the wall thickness is 6mm (a). construct a net mohr's circle depicting the state of stress acting at any point along the length of the 20 marks (b). illustrate the state of stress above on a differential element (infinitesimal cube).

Liquid flows at steady state at a rate of 2 lb/'s through a pump, which operates to raise the elevation of the liquid 100 ft from control volume inlet to exit. the liquid specific enthalpy at the inlet is 40.09 btu/lb and at the exit is 40.94 btub. the pump requires 3 btu/s of power to operate. if kinetic energy effects are negligible and gravitational acceleration is 32.174 tt/s, the heat transfer rate associated with this steady state process is most closely 1)-2,02 btu/s from the liquid to the surroundings 2)-3.98 btu/s from the surroundings to the liquid. 3)-4.96 btu/s from the surroundings to the liquid. 4)-1.04 btu/s from the liquid to the surroundings.