Engineering, 13.07.2019 00:20 lilesgar7336
Apply the concepts of thermal expansion/contraction of metal and explain of a schematic diagram in a fusion welding process. with the aid of a diagram thermally induced stresses due to welding.
Answers: 1
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Engineering, 04.07.2019 18:10
Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges
Answers: 1
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
Engineering, 05.07.2019 23:20
Which one of the following faults cause the coffee in a brewer to keep boiling after the brewing cycle is finished? a. an open circuit in the heating element b. a short circuit at the terminals c. welded contacts on the thermostat d. a leak around the gasket
Answers: 3
Apply the concepts of thermal expansion/contraction of metal and explain of a schematic diagram in a...
Mathematics, 21.04.2020 23:58
Biology, 21.04.2020 23:58
Mathematics, 21.04.2020 23:58
Mathematics, 21.04.2020 23:58
Mathematics, 21.04.2020 23:58
History, 21.04.2020 23:58