Engineering, 11.07.2019 02:20 milak23

Adisk-shaped part is to be cast out of aluminum. the diameter 500 mm and thickness = 20 mm. if the mold constant = 3.0 s/mm2 in chvorinov's rule, how long will it take the casting to solidify, in minutes?

Answers: 2

Show answers

Answers

Answer from: asharrogers17

t =253.8s

Explanation:

Chvorinov's Rule can be written as:

$t=B(\frac{V}{A} )^{n}$

where t is the solidification time,

V is the volume of the casting,

A is the surface area of the casting that contacts the mold,

n is a constant

B is the mold constant

The S.I. units of the mold constant B are s/m2.

According to Askeland, the constant n is usually 2.

$V=\frac{\pi D^{2}h }{4} = 3.9*10^6$ mm3

$As=\pi D h+2\frac{\pi }{4} D^{2} =0.424*10^6$ mm2

V/A=9.198 mm

t = 3.0*9.198^2 =253.8s

Answer from: 163565

Chvorinov's Rule with Askeland Method: t = 4.286694102 minutes

Chvorinov's Rule with Degarmo Method:

Minimum time required at constant n = 1.5 : t = 1.408751434 minutesMaximum time required at constant n = 2.0 : t = 4.286694102 minutes

Explanation:

Data:

Aluminum disc

Diameter (D) = 500 mm

Thickness = Height (h) = 20 mm

Mold Constant (C) = 3.0 sec / $mm^{2}$

Required:

Solidification time (t) in minutes = ?

Formula:

The solidification time can be found by using the Chvorinov's Rule:

$t = C (\frac {V}{A})^{n}$

Where;

t = solidification time

C = mold constant

V = Volume of disc

A = Surface area of disc

n = constant

Note: According to Askeland n = 2.0 and According to Degarmo n varies 1.5 to 2.0 therefore , we will do for both method and by Degarmo method we can predict maximum and minimum solidification time.

Solution:

First, we will find the volume of the disc

disc = cylinder

therefore, Volume of cylinder is given by:

$V = \frac{\pi }{4} * D^{2} * H$

Where:

V = Volume of Cylinder

H = Height of disc

D = Diameter of disc

Now, putting dimensional values in above equation

$V = \frac{\pi }{4} * 500^{2} *20$

V = 3926990.817 $mm^{3}$

Second, we will find the surface area of the disc

Therefore, surface area of cylinder is given by:

$A = (\pi * D * H) + (2 * \frac{\pi }{4} * D^{2} )$

Where:

A = Surface area of disc

D = Diameter of disc

H = Height of disc

Now, putting dimensional values in above equation

$A = (\pi * 500 * 20) + (2 * \frac{\pi }{4} * 500^{2} )$

A = 424115.0082 $mm^{2}$

Finally, Moving towards the final solution

Chvorinov's Rule with Askeland Method n = 2:

Rewriting the equation:

$t = C (\frac {V}{A})^{2}$

Putting the dimensional and constants values in the equation

$t = 3.0 (\frac {3926990.817}{424115.0082})^{2}$

t = 257.2016461 seconds

Converting to minutes

t = 4.286694102 minutes

Chvorinov's Rule with Degarmo Method n = 1.5 (Minimum Solidification Time)

Rewriting the equation:

$t = C (\frac {V}{A})^{2}$

Putting the dimensional and constants values in the equation

$t = 3.0 (\frac {3926990.817}{424115.0082})^{1.5}$

t = 84.52508604 seconds

Converting to minutes

t = 1.408751434 minutes

Chvorinov's Rule with Degarmo Method n = 2.0 (Maximum Solidification Time)

Rewriting the equation:

$t = C (\frac {V}{A})^{2}$

Putting the dimensional and constants values in the equation

$t = 3.0 (\frac {3926990.817}{424115.0082})^{2}$

t = 257.2016461 seconds

Converting to minutes

t = 4.286694102 minutes

Answer from: Quest

i mean i gues

explanation:

Answer from: Quest

answer:

the answer is d

explanation:

Another question on Engineering

Engineering, 04.07.2019 18:20

Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives

Answers: 2

Answer

Engineering, 04.07.2019 19:10

Air inially occupying a volume of 1 m2 at 100 kpa, 27 c undergoes three internally reversible processes in series. process 1-2 compression to 500 kpa during which pv constant process 2-3 adiabatic expanslon to 100 kpa process 3-1: constant-pressure expansion to 100 kpa (a) calculate the change of entropy for each of the three processes. (b) calculate the heat and work involved in each process. (c) is this cycle a power cycle or refrigeration cycle?

Answers: 3

Answer

Engineering, 04.07.2019 19:20

Consider airflow over a flat plate of length l = 1.5 m under conditions for which transition occurs at le = 0.9 m based on the critical reynolds number, re,e = 5 x 10. evaluating the thermophysical properties of air at 400 k, determine the air velocity. (hint: use the tables to find the properties of air)

Answers: 3

Answer

Engineering, 06.07.2019 02:30

Plot schematically the tensile stress versus strain curves for a typical thermoplastic material at a temperature below its glass transition temperature (tg and at a temperature above its tg, respectively. do the same for a typical thermosetting material. list in a table any differences or similarities between the two materials at t> tg and t < tg, respectively, and relate them to the structures of the two types of polymers

Answers: 3

Answer

You know the right answer?

Adisk-shaped part is to be cast out of aluminum. the diameter 500 mm and thickness = 20 mm. if the m...

Questions