1.which type of camera tool pushes the picture back and makes it wider, exaggerating the distance between the background and foreground? a. telephoto lens b. neutral density filter c. wide-angle lens d. jib 2.what is the possible final effect if a director uses the wrong kind of filter or uses filters too much? a. it can look cheap. b. it can look unrealistic. c. it can look too bright. d. it can look too dark.

Now, open this passage to read about fafsa requirements. describe the information you will need to provide in order to complete a fafsa. list at least three of the required documents you must include.

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to

Write an expression that will cause the following code to print "equal" if the value of sensorreading is "close enough" to targetvalue. otherwise, print "not equal". ex: if targetvalue is 0.3333 and sensorreading is (1.0/3.0), output is: