What technique is most commonly associated with the use of malicious flash drives by penetration testers?

Write a program in plp assembly that counts up by one starting from zero (or one) inside a loop and writes this value to the leds every time the value is increased. the memory address of the leds is 0xf0200000. the table below shows the meaning and an example usage of the instructions covered in the video, plp instructions for project 1. instruction example usage meaning load immediate li $t0, 8 register $t0 is set to the value, 8. store word sw $t2, 0($t1) the value in register $t1 is used as the memory address. the value in register $t2 is copied into this memory address. add addiu $t4, $t3, 29 register $t4 is assigned the sum of 29 and the value in register $t3. jump j your_label_name the program jumps to the line following the label, "your_label_name: ". label your label name: defines a label called "your_label_name: " that can be jumped to

1. for which of the following are you not required to signal beforehand? a. changing lanes b. speeding up c. stopping

The ieee 802.11: defines standards for wireless local area network (wlan) communication protocols. identifies various computers or devices connected to a network. verifies any resource attached to another computer on a network that is different from the computer to which the user is logged on. connects multiple local area networks (lans) and wide area networks (wans).