For the bag class in Chapter 3 (using a fixed array and a typedef statement) what steps were necessary for changing from a bag of integers to a bag of double values

Write a function so that the main program below can be replaced by the simpler code that calls function original main program: miles_per_hour = float( minutes_traveled = float( hours_traveled = minutes_traveled / 60.0 miles_traveled = hours_traveled * miles_per_hour print('miles: %f' % miles_traveled) sample output with inputs: 70.0 100.0 miles: 116.666667

:you areto design the controller for alight that functions both as an ordinary light and also as a motion activated light and alarm. a.if the manual switch s is on, then the light l is on. b.besides the manual switch, there is a motion detector, m1, which activatesthis light.c.if motion is detected but the light is on anyway because s is on, only then a secondoutput a, an alarm, is turned on. d.the disable switch, d, disables the motion activated light and alarmbut leaves manual control operation of the light using switch s.(i)read the problem statement and clearly identify the inputs and outputs for the circuit you are designing. (ii)create the truth table for this system; include the light, alarm, switch, disable, and the motion sensor.(iii)draw a schematic of this system.

Computer programming is one type of what career