Design a function that produces a list of length n of the Fibonacci sequence in reverse order. The Fibonacci Sequence is the series of numbers: 0, 1, 1, 2, 3, 5, 8, 13, 21, 34, ... where the next number in sequence is found by adding up the two numbers before it. For example, the 2 is found by adding the two numbers before it (1 1), the 3 is found by adding the two numbers before it (1 2), and the 5 is (2 3). The function may work like:
> fib 0
[0]
> fib 1
[1,0]
> fib 10
[55,34,21,13,8,5,3,2,1,1,0]

The editing of digital photos us about the same level of difficulty as editing an analog photo

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form.you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used.hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?

Select the correct answer. which step can possibly increase the severity of an incident? a. separating sensitive data from non-sensitive data b. immediately spreading the news about the incident response plan c. installing new hard disks d. increasing access controls