A recursive method may call other methods, including calling itself. Creating a recursive method can be accomplished in two steps. 1. Write the base case -- Every recursive method must have a case that returns a value or exits from the method without performing a recursive call. That case is called the base case. A programmer may write that part of the method first, and then lest. There may be multiple base cases. Complete the recursive method that returns the exponent of a given number. For e. g. given the number 5 and the exponent 3 (53) the method returns 125. Note: any number to the zero power is 1. Note: Do not code for the example. Your method must work for all given parameters! Use this as your method header: public static int raiseToPower(int base, int exponent)

You need to design a circuit that implements the functions in the following table: s0 s1 function0 0 a + 10 1 a – b1 0 a + b1 1 a – 1s0 and s1 are 1-bit control inputs to select the function of the circuit. inputs a and b are 4-bitnumbers in 2s complement form. the output is also a 4-bit number in 2s complement form.you are allowed to use only one ttl 7483 4-bit adder to implement all the functions. but anynumber of other components (except the adder) can be used.hint: design a combinational logic circuit to modify the input b and the “carry input” of theadder depending on the control inputs s0 and s1.important: lab grade will depend on the working of the circuit & will be checked of by your labinstructor.1. is the output valid for the following input combinations: a. s0 = 0, s1 = 0, a = 7, b = 3? b. s0 = 0, s1 = 1, a = 7, b = 3? c. s0 = 1, s1 = 0, a = -4, b = -5? d. s0 = 1, s1 = 1, a = -8, b = 6? 2. what is the range of inputs (for both a and b) that will produce the valid output for all the functions?

When you interpret the behavior of others according to your experiences and understanding of the world your evaluation is

Me if you do then you get 10 points and brainliest