You are in the process of configuring a new computer. The motherboard has four memory slots and supports dual-channel memory. You install two memory modules. When you boot the computer, the BIOS recognizes both modules, but the memory is not configured to run in dual-channel mode. What should you do

Place the modules in the appropriate slots on the motherboard.

Explanation:

You must install memory in the correct slots to use dual-channel memory. The two slots may be next to one other or alternate depending on the motherboard. For the correct configuration, consult the motherboard manual. Dual-channel support is primarily determined by the motherboard (e.g., the memory controller), rather than the memory. With Rambus RAM, continuity modules are employed; if they were necessary on this system, none of the memory would have been identified. Memory timing is based on the CAS latency. If the system is unstable with the current memory timing settings, you may want to change the timing.

since it can be assumed that what aslam is making is a template by compiling all the commonly used excel formatting in several worksheets in an excel document, aslam can choose to save it using the .xltx or .xltm format instead. thus, aslam can distribute the templates he has made to his team members in an easier manner.

solution:

this situation is called an ip conflict.

data from a server is sent in small bits called packets. in an ip conflict, some packets will end up in one computer while some other packets will end up in another computer.

so…overall none of the computers get the data as the original message or picture being sent by the server cannot be retrieved with only half the packets. so it will show up as an error.

thus the final answer is d.